There are several people and automotive enthusiasts who do not like too many badges on the cars and often spend a considerable amount of money to get them removed. A debadged car looks cleaner and more appealing, and if you are someone who wants to remove the badges from the car, here is a detailed guide on How To Debadge A Car Like A PRO!
Step 1: Preparation
Before we start, it is essential to make the preparations so that the process becomes easy. Make sure you have all the items which are present in the list mentioned below:
- Fishing Line/ Dental Floss
- Heat Gun/ Hair Dryer
- Soapy Solution
- Plastic Card
- Glue Residue Remover
- Cotton/Microfiber Cloth
- Car wax
- Mild Cutting compound
Now, closely inspect the badges and ensure that they do not have any rivets/screws holding them to the body. If the badges have been pasted to the body using some form of adhesive, you are now good to go and can proceed to the next step.
Read Also: Modified Maruti Suzuki Ignis 1.4-L - Fastest In The Country?
Step 2: Removing the Badges
This is one of the essential steps in the entire procedure, and make sure that you have plenty of time to do this. To remove the badges, start with the following steps:
- Use the heat gun or the hairdryer to warm up the adhesive. The adhesive will become loose due to the heat and easier to remove.
- Now, spray the adhesive remover to the corners of the badges and heat it again.
- Use the fishing line/dental floss to remove the badges. You will have to insert the fishing line/dental floss between the badges and the body panels to do this. Do this process slowly and carefully.
- Once the badges have been removed, use the heat gun to loosen up the leftover glue and slowly remove it. Ensure that you do not overheat the panel, as it can damage your paint.
Once this step is over, you will have to clean the leftover residue from the paint without damaging the topcoat.
Pro Tip: You can use the soapy solution while removing the badges and the residue to minimise the chances of damaging the paint.
Step 3: Cleaning
Once you are done with the above steps, it is now time to clean the panel. Follow these steps to ensure that there is no residue left on the paint:
- Use a soapy solution and a cloth to clean the residue. You can also use a glue residue remover for this step.
- Once the glue is removed, you may use a mild cutting compound to remove all the swirl marks. It will also restore the top coat and make it look shiny.
- The last step involves waxing the surface with a good car wax/polish.
Read Also: ECU Remapping Pros and Cons - Is Car Remapping Good In The Longer Run?
With this being said, what do you think about this article on How To Debadge A Car? Share your thoughts in the comment box below. Also, join our 91W Auto Enthusiasts Whatsapp Group to be a part of more such interesting topics.
